Review: Concord Keystone Booster 2.0i Portable Battery Pack
Company: Concord Keystone Trading
Model: Booster 2.0i
Compatible: iPhone 4/4S/5
After months of delay, proper iPhone 5 battery cases are beginning to become available, most notably including Mophie's Juice Pack Helium and Juice Pack Air. There are still companies putting out makeshift alternative solutions, though, including Concord Keystone with its Booster 2.0i ($50). While it may look like a standard backup battery, it's actually accessorized to work with your iPhone 4, 4S, or 5, and has some unique features.
Physically, Booster 2.0i seems just about the right size for a 2000mAh battery. At 4” long, 2.3” wide, and 0.4” tall, it can easily slip into a pocket or bag. Made with a plastic exterior shell, it’s mostly matte with some glossy segments. Like most battery packs, it has a Micro-USB port for recharging, and a button next to a set of three lights, used to indicate the remaining charge. Along one of the short edges is a Micro-USB plug on a flat, retractable cable, measuring about 3.25” when fully extended. That cable is extremely thin, and it’s unclear how well it’ll hold up over time. The plug fits into an adjacent recess when not in use.
To provide compatibility with your iPhone, Concord Keystone includes two separate adapters in the box. One is glossy black, converting the Micro-USB plug to a 30-Pin Dock Connector; we’ve seen similar accessories before. The other is a Lightning adapter, although there’s no confusing it for Apple’s. It’s significantly larger in every dimension, cheaper-feeling, and doesn’t have a shiny silver connector; instead, the adapter is a white rectangle with gold pins and a red connector running down from the pins on either side. Despite its cosmetic issues, it’s a little bit longer than any Lightning plug we’ve seen, so it will be compatible with more iPhone cases. As we’ve noted in prior reviews of unlicensed Lightning accessories, customers are taking the risk that this adapter might become unusable if Apple decides to shut out unlicensed connectors in a future software update.
When it comes time to recharge your device, you can simply plug Booster 2.0i into the iPhone’s bottom and leave it dangling, but it’s actually made to attach to the back of the iPhone for convenience. A side panel is removable, exposing an adhesive pad that can stick to the back of a bare phone, or one in a flat case. It stays in place surprisingly well, and can be washed off if it loses stickiness. The removed panel can then be attached to the battery’s back, and a fold-out stand can hold the iPhone in landscape orientation.
We tested Booster 2.0i with an iPhone 5, and the results were somewhat mixed. While we were impressed to see the battery deliver a 95% charge to the fully depleted iPhone, it was disappointing that it took almost three hours to reach this level. This is because the power output is only 600mA, which might have something to do with the thin enclosure or Micro-USB cable. The quantity of energy was better than expected, but it will take about twice as long as competing 1-Amp battery cases we’ve tested.
Overall, Booster 2.0i is a mixed bag. While the price is impressive, especially compared to the similarly specced and featured Pop’n from PowerSkin, Booster 2.0i doesn’t have quite the same look or feeling of quality. Similarly, the actual recharging capabilities exceed expectations, so long as you’re willing to wait. And finally, the fact that it relies upon an unlicensed, odd-looking Lightning adapter is a bit worrisome, but it does perform as expected—for now. Taken as a whole, Booster 2.0i is just good enough to earn a flat B rating and our general recommendation; the price, case compatibility, stand, and power capacity all make it worth considering, with caveats.