Tips & Tricks
- March 21, 2017
Apple’s 3D Touch gestures which debuted with the iPhone 6s can be pretty useful for quickly cross-referencing information, calling up shortcut menus, and accessing rich notifications. However, since 3D Touch is a distinct gesture from merely touching and holding your finger on the screen, sometimes it can get a bit tricky to differentiate between the two, such as when trying to rearrange icons on the home screen as opposed to triggering shortcut menus.
Fortunately, Apple has provided a way to adjust 3D Touch sensitivity, hidden away the Accessibility section of your iPhone Settings app. Selecting 3D Touch from here provides three sensitivity levels that you can choose from based on how hard you want to press on the screen to trigger a 3D Touch action, and there’s even a helpful test area so you can try out the different settings. Also, if you find that 3D Touch just gets in the way and you’d rather not use it at all, a switch at the top allows you to turn the feature off entirely.
Apple designed its new AirPods to be pretty easy to set up and use, but one thing that’s clearly missing is the ability to change the volume using hardware controls without reaching for your iPhone. Fortunately, if you regularly use AirPods without an iPhone or Apple Watch within reach, you might find it handy to know that you can actually change your iPhone’s volume using Siri voice commands.
Simply tap on the AirPods to activate Siri, and then issue an appropriate command like Increase the volume or Turn the sound down and Siri will respond appropriately, although Siri seems to increase and decrease the volume in larger increments than using the hardware buttons on the iPhone. You can also ask Siri what the current volume level is, which will be expressed as a percentage. You can also ask Siri to set the volume to a specific percentage, which might be more useful once you’ve experimented a bit and become familiar with your preferred listening levels.
- March 14, 2017
- Apple Watch,
If you’ve got an Apple Watch, you’ve probably become accustomed to using it “fully online” with your paired iPhone within Bluetooth range, or by itself where you’re only tracking workouts and aren’t concerned about too much else. It’s easy for most of us to forget that the Apple Watch actually has its own Wi-Fi radio, and can actually connect directly to just about any Wi-Fi network — provided your iPhone has joined it before — and allow you to do quite a few things without your iPhone nearby. You can check if your Apple Watch is connected directly to a Wi-Fi network, rather than your iPhone, by swiping upward from the watch face and looking at the icon in the top right corner; you’ll see a green cloud here when you’re on a direct Wi-Fi connection.
While directly connected to a Wi-Fi network, you’ll still be able to send and receive iMessages and even make phone calls using FaceTime Audio, or even the cellular network if you’re on a carrier like AT&T or T-Mobile that supports Wi-Fi calling over iCloud connected devices. You can also control your HomeKit accessories, check weather and stocks, set and respond to reminders, and use Siri for anything that doesn’t require access to an app on your iPhone. The catch here is that your Apple Watch will only connect to networks that your iPhone has previously joined, and there’s no way to join captive networks from the Apple Watch, meaning this feature probably won’t be too useful when you’re stopping into a Starbucks on your run — although of course you’ll still be able to pay for your coffee using Apple Pay or a card in your Wallet app.
While the fourth-generation Apple TV supports a variety of MFi Game Controllers, most games can also still technically be played using the Siri Remote as well. However, in a lot of games you’ll probably find the Siri Remote too small and awkward to use as a game controller — especially in those cases where you’re expected to turn it sideways and use the accelerometer. While you can of course just go out and buy a game controller like the SteelSeries Nimbus, that’s not always an easy expense to justify if you’re just a casual gamer.
Fortunately, there’s another possible option, courtesy of Apple’s Apple TV Remote app. In addition to replacing your Siri Remote for normal Apple TV control and navigation functions, it can also double as a basic game controller. Load up the Remote app on your iPhone, and once you’re in a game, a game controller icon will appear at the top of the screen — tap on this and you’ll be taken into a landscape view with a touchscreen surface on the left and two game controller buttons on the right. While you still won’t get the full button support of a standalone game controller (and it’s not going to cut if for any games that now require game controllers), the larger iPhone still has a much better feel for gaming than the dainty Siri Remote.
- March 7, 2017
- Apple Watch,
If you’ve got friends and colleagues who are also Apple Watch users, you can help motivate each other by sharing your Activity rings with up to 25 of your friends. Once you’ve invited a friend and they’ve accepted your invitation, you can see their Activity data either by swiping to left from your rings in the watchOS Activity app, or by going to the Sharing tab in the Activity app on your iPhone.
By default, this list sorts you and your friends alphabetically by name, showing your progress toward each of your move goals. You can actually change this sort order, however, to rank yourself among your friends by how far you’ve each progressed toward your daily Move, Exercise, or Steps goals, or how many workouts you’ve completed — giving yourself even more motivation to get to the top of the leaderboard each day. In the iPhone Activity app, this is done from the Sort button in the top-right corner, while on the Apple Watch Activity app you can force touch (press hard) while viewing your friend list to access the option sorting options. On the Apple Watch, you’ll also see the current sort order displayed at the top of the list.
When HomeKit was first introduced in iOS 8, Apple chose to position the Apple TV at the centre of the system, to act as a hub or gateway for controlling access to HomeKit devices remotely. Without an Apple TV, you could control your HomeKit accessories directly from an iPhone, iPad, or Apple Watch that’s in Wi-Fi or Bluetooth range, but when away from home, you’d have no ability to control or even monitor the status of your HomeKit devices — for that you’ll need a HomeKit hub, which was originally a role limited to the Apple TV. While the third-generation Apple TV originally filled this role — and still can in a limited capacity — the stakes went up with iOS 10 and tvOS 10 last year, leaving the older third-gen model out of the HomeKit party for features like streaming video from HomeKit cameras, running automation routines, and accessing more advanced permissions for your secondary HomeKit users.
- February 28, 2017
- Apple TV,
Thanks to Siri, the fourth-generation Apple TV has a couple of ways to easily bring up closed captioning while you’re watching a show, ranging from simply asking Siri to “turn on closed captioning” or “subtitles” to the very useful “What did he say?” query, which will automatically skip back a few seconds and temporarily turn subtitles on. While these are handy enough for many, if you find that you don’t always want to talk to Siri in the middle of a movie, you’ll be happy to know that you can also assign closed captioning to an accessibility shortcut on your Siri Remote, allowing you to toggle closed captioning on and off by simply triple-clicking the menu button.
You can find this feature in the General, Accessibility section of your Settings app — look for the Accessibility Shortcut option down at the very bottom. In here, you’ll find a number of accessibility options that can be activated (or deactivated) whenever you triple-click the menu button, including Closed Captions. Select this option (a checkmark will appear to confirm it’s activated), and triple-clicking the menu button while watching a program will toggle the closed captions on and off without interrupting whatever you’re watching. Note that you can assign more than one accessibility feature to the shortcut — each selected option will be indicated with a checkmark beside it; if multiple options are assigned, triple-clicking the menu button will bring up a full-screen menu asking you to select which feature you want to enable.
- February 21, 2017
- Apple Watch,
Apple expanded the Activity app in watchOS 3 with a new feature that allows you to share the progress of your activity rings with up to 25 of your friends, family, co-workers, and other workout buddies. It’s relatively straightforward to set up — just go to the Activity app on your iPhone, select the Sharing button at the bottom, and follow the instructions — once you’ve added friends and they’ve accepted your sharing requests, you’ll both be able to see each other’s activity and you’ll start getting notifications on your Apple Watch whenever one of them closes their rings or completes an achievement or workout.
However, if you find that being constantly reminded of how far your friends are progressing ahead of you is more of a de-motivator, or simply want to be able to see your friends’ activity without being bothered by notifications during the day, you can mute the notifications from any of the users with whom you’re sharing your activity without having to “unfriend” them. To do this, go to the Sharing tab in the Activity app on your iPhone, select the user whose notifications you’d like to mute, and tap the “Mute Notifications” button. Your friend won’t know that you’ve muted their notifications, and you’ll still be able to see how they’re doing toward their goals if you care to go in and check, but you’ll no longer get notifications as they progress throughout the day.
The addition of 3D Touch to the iPhone 6s has been a productivity boon for a lot of users, with information now more quickly accessible from the home screen and within key apps, and iOS 10 improved upon this by putting widgets directly behind key icons on the home screen, and expanding the menus. While most of these popup menus remain static, there are some minor things that can be customized in certain apps.
In the iOS 10 Mail app, for example, if you have a Smart Mailbox set up to appear in your mailbox list, this will automatically be displayed below the “Inbox” entry on the popup menu that appears when you 3D Touch on the Mail icon. While only one Smart Mailbox will appear on this menu, any one of them can be set to appear simply by placing it at the top of your mailbox list in the Mail app — iOS simply chooses the first enabled Smart Mailbox on the list and displays it on the popup menu.
Sadly, only the predefined Smart Mailboxes are supported here — even though you can add individual mailbox folders to the main list, they can’t be made to appear on the 3D Touch menu. Still, if you find yourself regularly looking at just flagged messages, messages from your VIP contacts, or messages with attachments in your inbox, it’s a useful shortcut.
If you use the built in Mail app on your iPhone or iPad and deal with sifting through a lot of email messages, you’ll likely appreciate a small feature that Apple added in iOS 10, which gives you the ability to quickly and easily filter your message listing. A button in the bottom-left corner of the Mail app will toggle on a filtered view that provides quick filtering of messages in the current mailbox. By default, the filter will show you only flagged messages. However, if you tap on the “Filtered by” link that appears in the bottom status bar when the filter is enabled, you can refine the filter with other criteria, including unread messages, messages addressed To or CC’ed directly to your email address (as opposed to those from mailing lists), or only messages with attachments or messages from contacts on your VIP list. Multiple criteria can be combined here as well, so you could include both unread and flagged messages, but only those which include attachments.
- February 9, 2017
- Apple TV,
With its support for a wide range of apps, along with its new role as a HomeKit hub, the fourth-generation Apple TV has become a more central device for many users than ever before. Since the device supports both wired (Ethernet) and Wi-Fi networking options, you may be led to believe that you’ll get the best network performance from your Apple TV by going with the wired option — after all, wired connections have traditionally always been faster and more reliable than wireless connections. Oddly, however, this isn’t necessarily the case with the fourth-generation Apple TV.
Apple included 802.11ac Wi-Fi with MIMO in the fourth-generation Apple TV — a networking protocol that is capable of performing at speeds of up to around 400-500 mbps in practical applications. Somewhat ironically, however, the wired networking port on the fourth-generation Apple TV is only 10/100BASE-T Ethernet, limited to maximum throughput of 100 mbps. This makes the Apple TV one of the relatively rare devices that can actually – in theory at least — perform better over a Wi-Fi connection than a wired Ethernet connection.
The ability to use iMessage Apps was one of the cooler new features added to iOS 10, but with so many developers adding their own little iMessage apps to their main apps, you may find your Messages app drawer quickly becoming inundated with new icons. Fortunately, it’s not difficult to remove or reorganize your iMessage Apps, or prevent new ones from automatically showing up when one of your existing iOS apps gains iMessage App support in an update.
Removing and reorganizing iMessage Apps is done in much the same way as normal apps on your home screen — just bring up the app drawer in iMessage by tapping on the app symbol to the left of the text entry field, and then tap-and-hold on any one of the apps until they all start jiggling. From there, you can drag them around to reorganize them, even between pages, or tap the “X” in the top right corner to remove the app entirely. Removing a dedicated iMessage App like a sticker pack from here will remove it entirely from your iPhone, iPad, or iPod touch; removing the iMessage App version of a standalone app, on the other hand, will only hide the iMessage App extension, leaving the main app untouched.
Apple made some arguably nice changes to its core Music app in iOS 10, departing from the Apple Music centric version that debuted with iOS 8.4 and putting the user’s own music library back front and center, where it belongs. One of the features that came back along with this, albeit in a slightly different form, was the ability to customize the main Library view to choose which organizational categories you want to see there.
Apple’s Activation Lock feature, introduced three years ago with iOS 7, is a great security feature that’s been credited with a decline in theft rates. Like any good security system, however, it can be a bit of a double-edged sword; Apple has made Activation Lock so secure that it can be a problem for users who are trying to purchase a used iPhone (or other iOS device) legitimately — if the original owner of the device forgets to turn off the Activation Lock, or doesn’t realize that they need to, the buyer can basically end up with a brick.
Fortunately, Apple has addressed this by creating a Check Activation Lock Status web portal that anybody can use to determine if Activation Lock is enabled on a specific iPhone, iPad, or iPod. To use the service, you simply need to enter the serial number or International Mobile Equipment Identity (IMEI) number of the device in question, which any legitimate seller should have no problem providing you with. After entering the serial number or IMEI (and the captcha code to prove you’re a human), the site will return a simple response showing whether Activation Lock is on or off, followed by an explanation of what this means, and what actions should be taken to deactivate Activation Lock if necessary.
The Music app got another somewhat quiet update in iOS 10.2, allowing you to now choose a sorted order for the playlist, song, album, and video listings in your own music library. A new “Sort” button appears in the top right corner when viewing these three categories. Playlists can be sorted by Playlist Type, Title, or Recently Added, while Song, Album, and Video views offer sorting by Title or Artist.
Note that sorting by Playlist Type is the standard order that was used in prior iOS versions, placing Genius playlists at the top of the listing, with all other playlists still mixed below alphabetically — despite the name, it still doesn’t distinguish between Apple Music and user-created playlists, for whatever reason. The sort button is understandably not available in other views such as Artists, Compilations, Composers, and Genres.
One of the more controversial changes in Apple’s iOS 10 Music app was the elimination of the longstanding star-based rating system for music tracks. It’s unclear whether this was just inadvertently left out in the redesign or whether Apple felt that the new love/dislike system was enough — but clearly somebody at Apple got the message, as the ability to use star ratings has quietly returned in iOS 10.2.
It’s still hidden by default, but if you’re an iTunes power user who has gotten used to being able to rate your tracks on a sliding scale — a feature that’s been available in iTunes and on the iPod since its very inception — you’ll be happy to know that a quick trip into the Music section of your Settings app provides an option to toggle the feature back on.
While Apple has brought the star rating feature back, it’s moved it into the track menu, rather than hiding it behind the artwork as it was in iOS 9. Tapping and holding on a track, or tapping the ellipsis button in the bottom right corner of the “Now Playing” screen will bring up the menu, and if you’ve enabled star ratings in your settings, a “Rate Song…” option should now appear there. Ratings should also once again sync back to your iTunes library via direct sync, Apple Music, or iTunes Match, however this doesn’t replace the love/dislike system — if you’re an Apple Music user, star ratings won’t affect the recommendations you see in the “For You” section.
- January 17, 2017
- Apple Watch,
Along with major enhancements like built-in GPS and swim workouts, the Apple Watch Series 2 includes another unique new feature which allows you to gradually wake the screen using the Digital Crown — essentially letting you sort of “peek” at it. The setting to enable this can be found under General, Wake Screen in the Apple Watch app on your iPhone, although oddly it’s not present in the corresponding section in the watchOS Settings app — you have to enable it from your iPhone.
When the fourth-generation Apple TV launched in the fall of 2015, we found the absence of direct support for controlling Apple HomeKit devices to be a conspicuous omission — especially considering the Apple TV was already designed to act as the hub for remote access to HomeKit accessories. In other words, HomeKit accessory commands were being processed through the set-top box, but there was no way to allow the user to participate using the Apple TV itself. It took another year to come to fruition, but tvOS 10 brought interactive HomeKit support to the set-top box last fall, opening up not only the ability to control HomeKit accessories via Siri commands, but also support for third-party tvOS apps to access the HomeKit framework.
Siri HomeKit commands can be used to adjust most accessories (e.g. “Turn off the living room lights”) and activate scenes (e.g. “Set the movie night scene” or even simply “It’s movie night”), and we’ve found they often work more quickly than issuing the same commands on the iPhone or Apple Watch. You can also set your thermostat (e.g. “Set the temperature to 24 degrees”) and inquire as to the status of various HomeKit sensors to check temperature and other information (e.g. “What is the temperature in the living room?” or even “Is there carbon monoxide in the basement?”).
- January 5, 2017
If you’re using a CarPlay system with your iPhone, you may have noticed that a small number of the built-in apps will automatically display their notifications on your CarPlay screen. While this is a useful feature for some, if you don’t want to see certain types of alerts and notifications in your CarPlay system while driving, the good news is that you can disable them on a per-app basis from the standard iOS Notification Settings.
To do this, go into the Settings app on your iPhone, select Notifications, and then select the specific app for which you want to turn off CarPlay notifications — Calendar, FaceTime, Messages, Phone, or Reminders — and you should see a Show in CarPlay setting below the lock screen setting. Toggle this off, and you’ll no longer be bothered by notifications from that app when your iPhone is plugged into your CarPlay system (although the notifications will still be shown on the lock screen of your iPhone itself). In the case of the Calendar app, you can even customize this based on the type of notification, so you can choose to still be alerted of upcoming events while not getting notifications for shared calendar changes. Unfortunately, if you’re looking to add extra notifications to your CarPlay screen, you’re out of luck for now — as of this writing, only the five built-in apps noted above support displaying notifications via CarPlay.
- December 29, 2016
- Apple TV,
Apple’s new AirPods will automatically pair with any iPhone or iPad running iOS 10.2 or later, and sync via iCloud to your other compatible iOS devices, Apple Watch, and macOS Sierra. However, for whatever reason — perhaps because of its role as a common “family” device — Apple hasn’t included the Apple TV’s tvOS into the mix; even if your Apple TV is signed into the same iCloud account you’re using on your iPhone, it’s left out of the automatically synced pairing party.
Fortunately, AirPods can be still be paired manually like just about any other Bluetooth device, and they actually work quite well with the fourth-generation Apple TV. To pair your AirPods with the Apple TV, go to Settings, Remotes and Devices, Bluetooth, and then put your AirPods into their charging case, leave the lid open, and press and hold the setup button on the back of the case until the LED starts flashing. Your Apple TV should detect your AirPods and show them under “Other Devices,” and you can then select them and they’ll pair right away. Once paired, you can listen to audio from your Apple TV through your AirPods whenever they’re out of the case and in your ears, and the automatic ear detection feature will even work to pause your audio or video when you remove and reinsert the AirPods. Note that you won’t be able to trigger Siri on the Apple TV with a double-tap, however — regardless of the double-tap setting you’ve chosen, double-tap defaults to play/pause control when paired with other Bluetooth devices that don’t specifically support AirPods.
- Report confirms legitimacy of at least some of the stolen iCloud credentials being held for ransom
- New (PRODUCT)RED iPhone 7 and iPhone 7 Plus, iPhone SE, and 9.7” iPad now available to order
- Apple Store down again ahead of new iPad, Product(RED) iPhone launch
- Apple acquires automation app Workflow
- Nintendo updates Super Mario Run, makes more courses available for free play
- Apple confirms iCloud and Apple ID systems have not been breached in response to hacker threat
- Hackers claim to have access to millions of iCloud accounts, demand ransom from Apple
- Apple’s Siri in the running to voice control room functions at Marriott’s Aloft hotels
- Apple releases iTunes 12.6 with new cross-device movie rental feature
- Apple introduces Clips video app
- ExoLens PRO with Optics by ZEISS Wide-Angle Lens Kit
- Blue Sadie Headphones
- Circle with Disney Parental Control and Internet Filtering System
- Pioneer Rayz Plus Lightning Connector Earphones
- BEEM United BeMe D200 Lightning Connector Earphones
- Jam Audio JAM Xterior Max Rugged Wireless Bluetooth Speaker
- HiFiMAN Edition S Headphones
- Divoom Timebox Mini Bluetooth Speaker
- iClever BoostSound BTS-09 Bluetooth Speaker
- Soundcast VG1 Bluetooth Speaker
- Top Five: The Best Products for Building a Smart Home with HomeKit
- Instant Expert: Secrets & Features of watchOS 3
- Instant Expert: Secrets & Features of tvOS 10
- Instant Expert: Secrets & Features of iOS 10
- Inside the betas: iOS 10 Photos gets Advanced Computer Vision
- Inside the betas: iOS 10 Music app delivers ‘clarity and simplicity’
- Inside the betas: iOS 10 Maps gets a major redesign
- Inside the betas: iOS 10 shakes up the user experience
- Inside the betas: watchOS 3 promises a real speed boost
- Inside the betas: A sneak peek at what’s new in tvOS 10