Tips & Tricks
- April 18, 2013
If you’re an iPhone 5 user, you get an additional small feature in the Camera app that you may not have noticed before—the ability to snap still photos while you’re also recording video. To use this feature, simply start recording video as you normally would and you’ll see a camera button appear near the video recording button. While recording, simply tap on this button to capture a still photo, and repeat as necessary; there is no specific limit to the number of photos you can capture while recording, but keep in mind that they will be taken at the same resolution and aspect ratio as your video—1080p for the rear camera or 720p when using the front camera. That’s basically 2 MP (1920 x 1080) or 0.9 MP (1280 x 720), depending on which camera you’re using; not all that big of a difference for the front camera, but considerably less than the full 8 MP quality that the iPhone 5’s rear camera is normally capable of. Still, it’s a great way to capture that cute moment that comes up while you’re recording video of your kids.
While the iPhone doesn’t offer the sophisticated widget system of the Android platform, there are three pre-defined widgets available in the Notification Center for weather, stocks, and Facebook/Twitter posting. The Weather and Stocks widgets will display information from the corresponding built-in apps, which you can open with a tap. The “Share Widget” includes options for posting directly to Twitter and Facebook and will only appear if you are signed into either or both of these accounts from the options in your Settings app—note that these have no connection to the individual Facebook and Twitter apps, but are instead tied into the integration built directly into iOS.
You can disable these widgets or change the order of them with a quick trip into the Notifications section in the Settings app. If you’re sorting apps “By Time” the widgets will always appear at the top, but you can re-order them in relation to each other; if you’re sorting manually, you can place them anywhere, even below any active notifications.
If you have an iPhone, iPad, or iPod touch used by kids in your household, you may find Apple’s default password policy for in-app purchases to be less than ideal. By default, iOS only prompts for a passcode for App Store purchases after 15 minutes have elapsed since the last purchase, and no longer prompts for a passcode at all when installing previously purchased apps or updating apps that are already on your device. Fortunately, this can easily be changed by a quick trip into your device Restrictions, found under the General section in the main iOS Settings app. If you haven’t setup any parental restrictions on this device already, you’ll need to tap the “Enable Restrictions” button at the top and set a four-digit passcode that will be required to access the Restrictions settings in the future. Once you’ve done this, scroll down to the “Require Password” option and tap on it to change the setting from “15 minutes” to “immediately.”
This will not only require a passcode to be entered for every purchase, regardless of how much time has expired since the last one, but will also require a passcode for installing previously purchased apps and updating existing ones—basically for purchasing or downloading any content from the App Store.
The introduction of turn-by-turn voice guidance to the Apple Maps app in iOS 6 was a welcome addition, but if you regularly listen to music or other audio from your iPhone while driving you may find the volume of the spoken directions doesn’t always match up well. Fortunately, Apple provided a way to adjust this separately from your main device volume—simply go into your Settings app and select Maps and you’ll find four options under “Navigation Voice Volume” to adjust between three different presets, or turn the voice off entirely if you’d rather just rely on the visual directions.
The iPhone has included a Clock app with an alarm feature since it first debuted in 2007, however until recently the ability to wake up to a song from your music library has been conspicuously missing—a particularly odd omission considering that the older, traditional iPod models have supported this capability for close to a decade. The good news is that iOS 6 finally delivers this capability, if only partially; in the iOS 6 Clock app, you can now choose a specific song from your music library to play when a given alarm sounds, however support for starting an actual playlist remains absent.
To set this up, simply go into the Clock app and create a new alarm or edit an existing one and choose the “Pick a song” option for your alarm sound. This will open the music browser where you can either search for a specific song or browse through your library by artist, album, genre, or playlist. As an added bonus, the Clock app will display a list of the most recent five songs that you have selected, allowing you to easily re-use them for additional alarms in the future.
If you often listen to your iPhone, iPad, or iPod touch in very noisy or very quiet environments, you may be happy to know that iOS 6 now includes a new “Late Night” audio mode that can improve your listening experience. Somewhat oddly hidden with the equalizer settings under Music in the iOS Settings app, the Late Night setting compresses the dynamic range of audio output, basically reducing the volume of loud sections and increasing the volume of quieter ones. Further, unlike the other EQ settings, which apply only to music listening, “Late Night” actually applies to all of the sounds from your device, including videos and system sounds. Note that Late Night mode is not available on older device models such as the iPhone 3GS, iPhone 4, and fourth-generation iPod touch.
If you’re using more than one cloud service for contacts on your iPhone, iPad, or iPod touch—such as accounts for work and personal contacts—then you probably want to make sure that you’re creating any new contacts in the proper address book. In your Settings app, under Mail, Contacts, Calendars an option should appear in the “Contacts” section whenever you have more than one account configured for contact sync, allowing you to choose the default account where any new contacts you create should be placed. This will work for any contacts that you create from other iOS applications as well as contacts created in the Contacts app when more than one address book is selected. See Setting default account for new Contacts for more information.
If you use both work and personal e-mail accounts on your iPhone, iPad, or iPod touch, iOS 6 has introduced a useful feature allowing you to now configure your notifications separately for each of your accounts, along with separate notification settings for your VIP list. To set this up, simply go into the Notification section of your iOS Settings app, and choose the “Mail” option, where you should see an entry for each of your configured e-mail accounts as well as for your VIP list; selecting an entry will take you to the standard iOS notification settings, allowing you to customize whether notifications appear in the Notification Center and/or the lock screen, choose to show badges, banners or alerts, and set a new mail notification sound for that particular account. This feature is particularly useful when combined with the VIP list as you can limit high priority alert sounds and lock screen notifications to only e-mails from your important contacts.
If you receive a lot of e-mail, it’s important to be able to quickly filter out the important messages from the chaff. iOS 6 introduced a new VIP list feature that allows you to create a list of your important contacts that can then be used to prioritize notifications and filter your inbox to only see mail from those Very Important People. You can easily add a contact to your VIP list by tapping on the From address in an e-mail message and selecting the “Add to VIP” button at the bottom of the contact card. Once you have one or more entries in your VIP list, a new “VIP” virtual folder will appear in the Mail app right below the Inbox which you can access to display only the messages received from those who are on the list. VIP contacts are also indicated by a star beside each message, in place of the blue dot for unread messages, or as a hollowed-out star for read items. As an added bonus, if you’re syncing your Contacts using iCloud, your VIP list will also sync with your other iOS 6 devices and Macs running OS X Mountain Lion.
- March 14, 2013
Apple’s iMessage service can be very useful if you’re on a limited text messaging plan, since iMessages travel over the Internet, using your cellular data plan, rather than being charged at exorbitant per-message rates. When composing a text message, the iPhone Messages app looks up the recipient address to determine whether an iMessage or standard SMS message will be sent, and indicates this by the color of the Send button—blue for iMessage, green for SMS. Your iPhone will send messages via iMessage whenever possible, but will automatically “fall back” to sending a standard SMS message whenever the recipient can’t be reached via iMessage, such if they are out of data coverage. Fortunately there is a way to disable this feature, since it can otherwise result in unexpected SMS charges: Simply go into your iPhone Settings app, selecting Messages and toggle the option to “Send as SMS” to OFF. This will not prevent you from specifically sending SMS messages to folks who aren’t using iMessage at all, such as non-iPhone users, but will at least prevent your iPhone from unexpectedly racking up SMS charges when an iMessage can’t be used; instead the iMessage will just remain queued up until it can be delivered via the iMessage network.
Although iOS doesn’t specifically provide an “Owner Information” feature, if you’re concerned about losing your iPhone, iPad, or iPod touch you can easily create your own version simply by using a custom lock screen wallpaper. Simply take your favourite wallpaper image and load it up in Photoshop or a similar image editing tool, and add whatever text you want, such as a name or contact number. Be sure to place the text within the general center area of the image so that it doesn’t get obscured by the lock screen banners and controls, and then save the file, transfer it into your iOS Photo library via either iTunes or simply e-mailing it to yourself, and set it as your lock screen wallpaper. An elegant but simple solution that allows you to get as creative as you want and displays your contact information front-and-center.
- February 26, 2013
iOS supports a handy feature known as the Bluetooth Phone Book Access Profile for transferring your contacts from your iPhone to a compatible Bluetooth device such as an in-car system, allowing for direct access to your contacts from you car’s dashboard. If you don’t want to transfer your entire contact list to your car, however, you can set which contact categories and groups are available in your Bluetooth device settings. Once you’ve paired your car kit or other Bluetooth device with your iPhone, simply tap on the arrow icon to the right of the device name in the Bluetooth devices listing to bring up additional settings for that device. If the device supports the Phone Book Access Profile, you will see an option here allowing you to enable or disable contact sync entirely; when enabled, additional options appear allowing you to control what groups of contact information are available to the remote Bluetooth device, including your phone favorites and recent calls lists, all contacts, or any specific contact groups you may have created.
- February 14, 2013
The Do Not Disturb feature introduced in iOS 6 is a very handy way of essentially silencing your iOS device entirely. However, it doesn’t really provide an option for only preventing incoming calls while still receiving notifications for things like text messages and e-mail. If you’re in a situation where you don’t want to be disturbed by incoming phone calls but want to keep the rest of your notifications enabled and you’re on a GSM network, you can actually use call forwarding to simply send all of your calls straight to your carrier’s voicemail access number.
To enable this feature, you first need to find out which number is being used for your voicemail forwarding by going into the Phone app and dialing *#67# and pressing the “Call” button. Write the number down that appears here and then simply go into Settings, Phone, Call Forwarding and enable it using this number. All of your incoming calls will be sent directly to your voicemail as long as Call Forwarding is enabled, and when you want to go back to receiving incoming calls normally,simply go back into your Settings app and toggle Call Forwarding back OFF. As an added bonus, the iPhone will retain the last number used for Call Forwarding, so when you want to send all of your calls to voicemail again, you can simply go back in and toggle the Call Forwarding setting back ON without needing to re-enter the number again.
For more details, check out this week’s Ask iLounge article on Sending all iPhone calls to voicemail.
Apple’s Passbook app is great for letting you store a digital wallet for everything from your Starbucks card to your airline boarding pass, and by default includes location- and time-based notifications, allowing passes to come up automatically when you’re near your favourite store or your event is about to start. While you can easily turn these notifications off globally via Settings, Notifications in the way as for any other iOS app, what happens if you prefer to receive notifications from certain important passes—such as your airline ticket—while preventing notifications from appearing when you happen to walk by a local movie theatre? The good news is that you can do this right on the pass itself—simply open Passbook, select the pass, and tap the small “i” button in the bottom right corner to virtually flip the pass around and display additional details. Among these will be a Show on Lock Screen option which you can toggle off to prevent that particular pass from displaying time- and location-based notifications.
Since the release of iOS 6.0 last fall, Apple has gradually begun changing the rules for in-app advertising and device identification, transitioning developers to a new “Advertising Identifier” in place of the older, permanent Universal Device Identifier (UDID). iOS 6.0 introduced the ability for users to opt out of this new form of tracking entirely via a rather obscure option tucked away at the bottom of the About screen in the Settings app. With iOS 6.1, users now have an additional option that can be found here—Reset Advertising Identifier—that can be used to generate a new, unique Advertising Identifier for your device. This can be useful for those users who may not mind targeted ads or other forms of device tracking but may wish to effectively “start over” with a new unique advertising ID.
Apple includes a “Learn More” link at the bottom to provide more information on this feature, explaining that advertising networks are not yet required to use the new iOS 6 Advertising Identifier feature, and hence the use of the word “Limit” rather than “Disable” or “Opt-out,” suggesting that it will not yet completely eliminate ad tracking, but it’s definitely a step in the right direction if you’re concerned about this. Apple has begun transitioning developers away from using the UDID, and is expected to prevent third-party access to it entirely at some point, requiring developers to use the new user-controlled Advertising Identifier if they still wish to identify specific devices in their apps.
If you’re an iTunes Match user, you may be happy to know that with yesterday’s release of iOS 6.1, Apple has returned the ability to not only download individual tracks from iCloud on-demand, but also to manually remove specific tracks or even entire albums and artists from your local device storage. Although this capability was present in iOS 5.x, it disappeared with the release of iOS 6.0 for unknown reasons. Now in iOS 6.1, however, if you’re low on capacity and want to free up some additional space by removing your downloaded tracks, simply choose a track, album or artist from the appropriate listing and swipe left-to-right to bring up a “Delete” button. The local copy of the track(s) will be removed from your device, but will remain available in your iCloud-based library for future access. Note that the delete button is only available when accessing song listings from outside of a playlist.
Be sure to check out our article, Instant Expert: Secrets & Features of iOS 6.1 for all the details.
Siri can be a very useful virtual assistant, but unfortunately its reliance on Apple’s servers to translate your requests means that it doesn’t always work when you’re on the fringes of network coverage or moving between a Wi-Fi and cellular network—such as when you’re leaving the house. Further, Siri will generally only tell you that it’s “having a problem” without being particularly helpful at explaining what it’s problem actually is, but it’s most often related to an error communicating with Apple’s servers—due to either a poor network connection on your end, or a problem on Apple’s. It’s also not uncommon for Siri to get hung up on a bad connection and refuse to handle requests even after your device has returned to a good network connection and everything should otherwise be working fine. If you notice that Siri is repeatedly not responding to requests even though you have a good connection, you can easily give it a nudge simply by toggling Airplane Mode ON on your device, waiting a few seconds, and then toggling it back OFF to reset your network connection, toggling Siri itself off and back on again, or in a worst-case scenario, simply turning your device off and back on. We’ve had more luck flipping either Siri or the phone on and off than using Airplane Mode, as there is clearly a bug that’s specifically hanging the Siri app. While these are not ideal solutions, they can help get Siri up and running again in a minute as opposed to thinking that it simply isn’t working for an hour.
If you’re using a Gmail or iCloud account in the iOS Mail app, you actually have the option of choosing to have the standard Trashcan button either delete messages or archive them. While the default behaviour for the button can be configured in the Mail account settings to archive instead of delete—in which case it will display as an archive bin rather than a trashcan—you can also override the behaviour on a per-use basis simply by tapping and holding your finger on the button for about a second; a pop-up menu will appear with both Delete and Archive options available. This works when viewing an individual message as well as when performing an archive or delete operation on multiple messages. Of course, this won’t work if the messages you’re working with are already in your iCloud Archive or Gmail All Mail folder, and sadly it also isn’t available for other types of Mail accounts—even if you have an Archive folder in your mailbox.
You’re probably already aware that you can save any partially-composed e-mail messages as drafts in the iOS Mail app—these messages go to a “Drafts” folder on your device and you can find them there simply by accessing it via your folder list. However, iOS 6 adds a cool new hidden feature that allows you to access any of your draft messages more quickly, right when composing a new message. Simply tap and hold on the Compose button in the bottom right of the Mail app and a quick list of all available drafts in your mailbox will appear, along with a button at the top to create a new message should you choose to do that instead. You can even swipe-to-delete from here to remove any drafts that you no longer need.
Apple’s Find My Friends is a useful app for sharing your location with close friends and family members, but it can also be used for temporarily sharing your location with groups of people that you may not want tracking for on a normal basis, such as when travelling with friends or coordinating a meetup somewhere.
To share your location temporarily, simply download and install the Find My Friends app, sign in with your Apple ID and password and then choose the “Temporary” button from the bottom menu bar. From here you can add the addresses of your temporary sharing group and specify when you want location sharing with this group to end. You can even setup more than one temporary location sharing group, and as an added bonus, Find My Friends provides quick links for sending an iMessage to the entire group. When an event expires, it will simply disappear from the list, along with any users who were added as part of that group.
- Report: iPhone 6S to look ‘nearly identical’ to iPhone 6
- Appeals court: Apple conspired to fix e-book prices
- Apple Music makes subscriptions available through carriers, adds iCloud Music Library
- Apple Music makes much-anticipated debut with iOS 8.4 release
- Apple Q3 earnings call set for July 21
- Iovine: Human curation is key for Apple Music
- Dr. Dre’s ‘The Chronic’ to make streaming debut on Apple Music
- Apple Music roundup: iOS 8.4 to get early Tuesday release, Sonos support on the way
- Apple suppliers now making iPhones with Force Touch
- Parrot announces North American details for new Minidrone lineup
- Just Mobile TimeStand for Apple Watch
- Soundfreaq Sound Kick 2 Wireless Travel Speaker
- iHome SoundFlask iBT32 Bluetooth Speaker
- IK Multimedia iKlip Grip
- Misfit Bolt Wirelessly Connected Smart Bulb
- Nomad Stand for Apple Watch
- MyCharge RazorUltra
- Ultimate Ears UE Roll Portable Bluetooth Speaker
- Braven BRV-PRO Bluetooth Speaker
- Olloclip Active Lens for iPhone 6 and iPhone 6 Plus
- CE Week 2015: IK Multimedia, Monowear’s Apple Watch bands + More
- Live From CE Week 2015: Brand New iPad, iPhone + Mac Accessories!
- A First Look at iOS 9’s Transit in Apple Maps
- Opinion: The ‘Grand Experiment’ of shifting to Google Photos
- Will removing a credit card from Safari also remove it from Apple Pay?
- Can I mute Handoff calls coming into my Mac from my iPhone?
- How do I keep my iPhone calls from ringing on my Mac?
- Why doesn’t Traffic show up on my Today Notifications Screen?
- Why doesn’t my iPhone reconnect to Wi-Fi after I turn it on?
- Why can’t I see the iPad-style landscape view on my iPhone 6 Plus?