The clear “full iPhone body” film protector saga continues this week, as we’ve now had the opportunity to test not just NLU Products’ BodyGuardz and ShieldZone’s InvisibleShield Full Body Shield for iPhone, but also three additional products: second-generation versions of both BodyGuardz and InvisibleShield, and a seemingly far less expensive competing option from Best Skins Ever called the iPhone Total Body Skin ($8).
Confused? So were we. After publication of our initial BodyGuardz and InvisibleShield reviews, both companies decided to withdraw their original products from the market, and replace them with superior versions. Then Best Skins Ever sent its version, so we felt that a re-comparison was in order. Our updated BodyGuardz and InvisibleShield reviews preserve the original details we published for your reference.
As between the three options, our top pick overall remains NLU Products’ BodyGuardz, for two reasons: clarity and value for the dollar. Though we remain less than convinced that any of these films is worth an entry price of $25—the cost of a good, complete iPhone case—NLU’s package includes two sets of front films and two sets of back films, bringing the total price per set down to $12.50. You can keep both, or sell one to a friend. By comparison, you pay $25 for a single set of InvisibleShield Full Body Shields—too much, in our view—and a much more reasonable $8 per set for the iPhone Total Body Skin.
However, price isn’t the only distinguishing factor here.
The three companies’ packages are substantially different from one another: NLU’s two sets of BodyGuardz come in a nice box with a big tube of application fluid and a simple, perfectly-sized squeegee that’s required to work air and water bubbles out from the film during application. ShieldZone’s InvisibleShields come in a simpler plastic container with two small tubes of similar fluid and a less impressive squeegee; ours was rough on its smoothing edge, and we didn’t get the sort of results we wanted when we used it on the film. Best Skins Ever mails you only a paper envelope, instructions, and the two skins: you supply the fluid (slightly soapy water) and the squeegee (a credit card) yourself. Each one takes roughly 15 minutes to apply, after which it looks rough even if you’ve worked out the bubbles, then improves after a 24 hour drying period. We found that our credit cards weren’t as good at working bubbles out as NLU’s squeegee; the Total Body Skin package will force you to improvise a little.
With one caveat, the best-looking of the three options was the BodyGuardz design. All three companies use highly similar film that covers most of the iPhone’s body with a largely clear, highly scratch-proof adhesive—the same general stuff you see as a paint chip protector on certain cars, and apparently as a helicopter blade protector on aircraft. But NLU’s version of the film is better looking than the ShieldZone version, which in turn is better looking than the Best Skins Ever version: each of the films has visible dimples when viewed on an angle, but NLU’s are the least noticeable, followed by the slightly more visible InvisibleShield, and the coarser Total Body Skin. None is hugely objectionable, but none matches the static-cling clarity of Power Support’s Crystal Film, and we prefer our film coverage as clear as possible; BodyGuardz is the closest to perfect.
It’s also worth a note that we found that we had to use two of the Total Body Skin front covers—one as a replacement for the other—before we got the results we wanted on the iPhone.
Though we started with a cleaned surface and tried to work miniature air bubbles out of the first Skin’s surface as best we could, they wouldn’t go away quickly, or after the first 24-hour drying period. Pulling the Skin off and putting a new one on solved the problem entirely. Another way of viewing this: though Best Skins Ever sells these for $8 each, you might need to order two before you achieve the clarity you want.
The only caveat to BodyGuardz’ superiority is the scope of its coverage. ShieldZone’s second version of InvisibleShield is a marked improvement over its predecessor, offering more complete coverage of the iPhone than we’ve seen from any competitor, albeit with almost comical consequences for both application and pricing. You apply the front and back stickers. Then you apply a Home button sticker, and two more front stickers to cover the rest of the chrome facade. Then you apply four more stickers to cover the iPhone’s corners. The process feels like you’re assembling a model car or another toy, and at twice NLU’s price and effort of application, we’re not sure that it’s worth it.