Review: JBL OnBeat Venue LT

Only a month and a half ago, JBL released OnBeat Venue, an all-in-one tabletop audio system that will likely be amongst the company’s last speakers to include Apple’s classic Dock Connector. As we noted in our review, “OnBeat Venue is a good value for its sub-$200 asking price, and hopefully will be the basis for an improved future model,” though we certainly didn’t expect to be reviewing the sequel so soon: OnBeat Venue LT ($200, aka OnBeat Venue Lightning) has arrived as the second Lightning connector-equipped audio system, and although it’s extremely similar to its predecessor, there are a handful of changes worth noting in this updated review. On balance, OnBeat Venue LT is good enough to merit the same general recommendation as the original OnBeat Venue, though it has preserved one noteworthy flaw and lost an arguably trivial set of features.

Review: JBL OnBeat Venue LT

Like OnBeat Venue, OnBeat Venue LT operates in two modes: docking and wireless. First, it can accommodate Lightning connector-equipped iPads, iPhones, and iPods using a front-mounted, spring-loaded dock with a small and similarly spring-loaded Lightning plug. As with JBL’s earlier OnBeat Micro, the Lightning connector here is highly incompatible with most of the new iPad, iPad mini, iPhone 5, iPod touch, and iPod nano cases we’ve been testing, because the plug’s metal bottom is flush with the plastic rather than extended a little upwards. Cases with fully open bottoms may work, however, and it bears mention that OnBeat Venue LT’s open-sided dock enables this to be the first truly iPad- and iPad mini-compatible Lightning speaker, so long as you’re not using a case—or willing to go wireless. To that end, you can lock the dock inside the chassis if you don’t want to use it, converting the speaker into a purely Bluetooth streaming audio system. With a firm push, the dock slips so completely inside the chassis that you’d never know it’s there.


Review: JBL OnBeat Venue LT

OnBeat Venue LT is a fairly sharp departure from the design themes we’ve seen from the company over the last five to ten years. Vaguely reminiscent of certain Altec Lansing speakers released a couple of years ago, OnBeat Venue LT has a dark gunmetal body with a black fabric grille on the front, dropping the black and silver body colors of OnBeat Venue while retaining orange rubber padding on the bottom. Once again, our editors’ opinions were generally positive on the new design, but it doesn’t look anything like JBL audio systems we’ve known over the years. Roughly 16.5” wide by 4.5” tall by 5” deep at its maximum points, it bulges and tapers to form a decidedly modern but hard to describe shape – something that wouldn’t look out of place sitting anywhere except a really old home. It runs solely off of an included wall adapter, and has the substantial weight and footprint you’d expect from a non-portable system.


Review: JBL OnBeat Venue LT

Even more than was the case with OnBeat Venue, OnBeat Venue LT’s controls and ports are a little unusual. The top includes illuminated power and non-illuminated volume buttons on the right, with illuminated “bass” boost and “movie” EQ buttons alongside a non-illuminated input select button on the left. Three lights in the center indicate whether the current input is line in, a docked device, or Bluetooth. On OnBeat Venue, the “bass” and “movie” buttons were intended to accompany rear-mounted component video out ports that let the older speaker serve as a video dock for some prior Dock Connector-based devices; one press of the “movie” button rebalanced the sound to make voices and sound effects stand out when you’re watching videos. But on OnBeat Venue LT, those video ports are gone, leaving only an aux-in port and power port on the back, sitting between two large bass ports in the chassis. It’s obvious that JBL rushed the updated version to market but didn’t take the time to change the top controls. They don’t hurt the system in any way, but they don’t help, either.


Review: JBL OnBeat Venue LT

As mentioned in OnBeat Venue’s review, there’s no remote control in OnBeat Venue LT’s box—a surprise for a $200 audio system. With Venue, JBL offered a free app called MusicBeat, which we described as not particularly compelling: basically just an alternate interface for creating playlists and playing back music. MusicBeat is no longer automatically offered when you connect an iOS device to OnBeat Venue LT, no great loss apart from the modest equalization features it offered.


Review: JBL OnBeat Venue LT

Sonically, OnBeat Venue LT is most noteworthy—not impressive, but noteworthy—because of its high-volume performance for the price. There are a total of four speakers inside: two smaller tweeters and two mid-range drivers, though again, JBL doesn’t specify their sizes or performance characteristics. Nothing appears to have changed in the speakers or amplifiers from OnBeat Venue to LT: the new system was identical in balance and performance to OnBeat Venue when we placed the speakers next to each other with iPad minis, one using a Lightning to 30-Pin Adapter for connectivity. Once again, LT includes a 30-watt amplification package that can be turned up to dangerously loud, medium-sized room-filling levels, the system’s signature benefit; you’ll be amazed at how loud it was even at the 1/5 mark on a connected device’s volume slider. Unfortunately, OnBeat Venue LT continues to exhibit very serious bass clipping and distortion at its top volume levels. At safer, lower volumes, we’d describe the sound as being solid rather than remarkable in any way: it’s respectably balanced, with enough treble, midrange, and bass to let songs sound good until the ear-destroying volume levels are reached, but the clarity’s basically par for the $200 speaker course, and there’s no emphasis or sparkle in the sound. You won’t confuse OnBeat Venue LT with the better five- or six-driver systems we’ve tested.

There’s one other noteworthy issue with OnBeat Venue LT, and that’s something we noted in certain other recent JBL audio systems— a dribble-like issue, such that manually stopped or changed tracks appear to stutter for a moment rather than ending or transitioning cleanly. This only happens during Bluetooth streaming, but it’s annoying, akin to a hiccup in the audio that has nothing to do with audio drop-outs or the distance you may be from the system. Wireless performance is otherwise entirely within expectations, and solid, but this issue detracts from what would otherwise have been a consistently great way to play audio through this system. If nothing else, this bug should have been fixed before the LT version shipped.


Review: JBL OnBeat Venue LT

Overall, OnBeat Venue LT is basically just OnBeat Venue with a Lightning connector, a slightly different color scheme, and a few trivial omissions; it’s still a good rather than a great speaker system. Thanks to the Bluetooth hiccups, it’s best-suited to users who don’t mind docking their devices, particularly owners of new iPods, iPhones, and iPads who occasionally want to fill a room with music and aren’t picky about sonic quality. JBL can and certainly will do better, but for now, this is competent and capable enough to be worthy of a general recommendation.

Table of Contents

Our Rating


Company and Price

Company: JBL/Harman Multimedia


Model: OnBeat Venue LT

Price: $200

Compatible: All Bluetooth-Capable or Lightning-Equipped iPods, All iPhones, iPads

Latest News